Sindoh N700 User Manual
Page 58
Advertising
Preparation for Using the Machine
1-
28
If Original Size is not set or if Previous Setting is not erased, the original size is recognized as the
old setting. If no setting was made or setting is erased, the original is recognized as LT size.
Note
- If no paper fits to the original size:
Put the original in the same size or change the reproduction ratio.
- Holding the original on the Flatbed does not allow Auto Detect. In this case,
press [Original] Key and set the original (When using Fax, press [Original Size] Key.).
Advertising