Sindoh N700 - Manual (Page 43)

1-
13
Preparation for Using the Machine
1
5. Power Switch and Energy Save Mode
Power Switch
Before turning the power switch on, check that the power cord is connected to the socket tightly.
Then, turn the power on by pushing the power switch at the right back of the Machine to “ | ”(ON)
position. To turn the power off, push the power switch to “○”(OFF) position.
Warning
- Do not plug/unplug the power cord or touch the power switch with wet hands;
it may be a cause of electric shock.
Important
- After turning the power off, wait at least 3 seconds and then turn it on.
- If the Machine lines idle long time or when moving the Machine, turn the power switch off
and pull the power cord out of the socket.
Energy Save Mode
When the Unit is idle for a certain time, it switches to Energy Save Mode automatically, thereby
reducing electric consumption.
In Energy Save mode, LED screen and all the lamps in the Control Panel turn off.
Standby time to switch to Energy Save Mode can be set by 1 ~ 240 minutes. The standby time is
set to 60 minutes when shipped at the factory. Pressing 【 】 Key allows to exit or switch to Energy
Save Mode manually.
After passing the setting time, you can set Auto Switch Energy Save Mode or Exit Energy Save
Mode.
For more information, see P. 6-5 「Basic-detailed description」 .