Sindoh N700 - Manual (Page 78)

Copy Features
2-
2
1. To set Original
Original
Original Size and Thickness available to set
Original Set Original Size Original Thickness
Flatbed A4, Letter and under -
Auto Reversing
Document Feeder
(ARDF) For 1 sided original, A5, HLT~A3,
11
”×17”(up to 600mm)
45 ~ 110K,
52 ~ 128g/㎡, 14~34lb
For 2 sided, original, A5, HLT~A3,
11
”×17”
45 ~ 90K,
52 ~ 105g/㎡, 14~28lb
- Quantity available to set for the ARDF is about 75 sheets based on ‘SINDOH Paper 75g/㎡’
(Standard Paper).
- Thickness of mixed size Original is 52~105g/㎡(45 ~ 90K).
- Original over 433mm cannot be made duplex copy or duplex scan
(It may cause the sheet crease or Original Misfeed.)
However, for 1 sided Original (up to 600mm), copy or scan is available.
Original not available to set on the ARDF
Setting the following original on the ARDF may cause paper jam, damage to original, white line, or
black line. So, set the following original to the Flatbed:
- Original out of the original size and thickness available for setting;
- Original stuck with staple pin or clip;
- Bent, folded, or creased original;
- Original adhered with tape;
- Surface-processed original such as thermal paper, art paper, silver paper, carbon paper,
and conductive paper;
- Original stuck with index or post-it;
- Thin and soft original to be used for registration document;
- Thick original such as government postcard;
- Bound original such as a book;
- Original in high transparency such as OHP paper or tracing paper;
- Original with not dried correction fluid or ink; or