Sindoh N700 - Manual (Page 87)

2-
11
Copy Features
2
1
Fit the original, with the copying side down, to the set mark in the left corner :
Set
Mark
Scale
2
Open the Bypass Tray (①)and lift up the Paper Push Lever (②) :
3
Set the postcard with the copying side down and then fit the Paper Guide to the paper.
4
Pull the Paper Push Lever down.
5
Select the size and type of the Paper.
Set [Postcard] in the Original Setting Window and then press [OK].
- When copying onto a reply card, press [Manual Input].
- Enter 148.0mm (length) and 200.0mm (width) and then press [OK].
6
Select [Thick Paper] in the paper type in special paper setting and then press [OK].
7
Press 【 】 Key.