Sindoh N700 - Manual (Page 335)

Item Checkup point
Checked
by
Checkup Cycle (sheets)
Remark
60.000 80.000 120.000 600.000
Occa-
sional
Feed
Return Regist Roller CS ▲ △
Sub Return Roller CS ▲ △
Paper Feed
Guide CS ▲ △
Floor Pad CS ▲ △
Pick,Feed roller
Assy CS ▲ ● △
Separate Roller
Assy CS ▲ ● △
Friction Pad CS ▲ ● △
Item Checkup point
Checked
by
Checkup Cycle (sheets)
Remark
60.000 80.000 120.000 600.000
Occa-
sional
Fusing Fusing Roller CS ●
Pressurizing Roller CS ●
Fusing Thermistor CS ●
Fusing Stripper CS ▲ ●
Cleaning Roller CS
Fusing Inlet Guide Plate CS ▲
Fusing Outlet Guide Plate CS ▲
Fusing Bearing CS
Pressurizing Bearing CS
Cleaning Roller Bearing CS
CS : Service Man
U : Customer
● : Replace by Total Counter number
◎ : Replace based on Logging Counter
▲ : Carry out cleaning, checkup, or oiling without fail.
△ : Carry out cleaning, checkup, or oiling, if required.
※ Since the above replacement items are based on using the A4 5% chart in general use
environment, the error of the replacement time may occur.
※ Please follow the replacement cycle since the above replacement items give direct impact
on the image and the machine operation.
※ The items (general parts) out of the above items should be checked up for the need or
fault. If a trouble arises, the actions taken by professional engineer will be required.
※ If any defect occurs within the replacement cycle, it shall be handled according to the
claim decision criteria by us.