Sindoh N700 - Manual (Page 21)

5
Before use
Moving the Machine
Warning
- Before moving the Machine, pull the power cord out of the socket and check that the cord
is removed from the Machine. At least two persons should move the Machine.
- When moving the Machine, remove the toner unit.
- Bend your knees enough when lifting the Machine up, to prevent damage to the spine.
Angle Regulation of the Control Panel
- To slant the angle of the Control Panel, lift the bottom of the Control Panel up by hands,
push the two levers (right and left) in the concave section upward (Arrows in the picture
below), and then lay down the Control Panel.
- To return the angle of the Control Panel to the original position (parallel), lift the bottom of
the Control Panel up.