Sindoh N700 - Manual (Page 314)

Maintenance and Troubleshooting
9-
30
Condition Checkup point Solution Reference
original is output
in much twisted
condition so
paper may be
rolled. - Load the paper onto the
Paper Tray inside out. -
Transmission
cannot be made. Check that the receiver’s
phone number is correct. If Speed Dial is used,
print the Speed Dial list
and then check that the
phone number is input
correctly. P. 3-4
Check that a number to
reach an outside line is
included. When dialing from the
interphone to the outside
line, include the number
to reach an outside line. -
original cannot
be transmitted in
series. Check that the upper
edge of the set files fits. Set the original again. P. 1-25
Check that there is a
page with smaller width
of the original than
minimum width. Set such page only onto
the flatbed and then
transmit it. P. 1-25
Transmission
cannot be made
by dialing. Check that the phone
number is correct. Dial the correct number. -
Check the number is
busy Wait for the phone to be
free. -
When using
Memory
Transmission, the
original cannot
be scanned. Check that the original is
set correctly. Set the original correctly. P. 1-24
Check that there is
insufficient memory. Check the memory.. -