Tweco VAF4 Transmig - Manual (Page 18)

TRANSMIG VAF4
INTRODUCTION 2-4 Manual 0-5231
Other Accessories
Accessories Part Number Description
TWECO No 4 MIG TORCH
3.6M EURO
OTWX412/3545
Euro connection type, length is 3.6 metres, 400
Amps @ 60%, contact tip OTW14/45 (1.2mm)
TWECO No 4 MIG TORCH
4.5M EURO
OTWX415/3545
Euro connection type, length is 4.5 metres, 400
Amps @ 60%, contact tip OTW14/45 (1.2mm)
TWECO SUPRA XT MIG
TORCH 4.0M EURO
SE400X4M16
Euro connection type, length is 4.0 metres, 450
Amps @ 60%, contact tip OTW15H/116 (1.6mm)
TWECO No 4 MIG TORCH
3.6M Tweco 4
717201
Tweco connection type, length is 3.6 metres, 400
Amps @ 60%, contact tip OTW14/45 (1.2mm)
TWECO No 4 MIG TORCH
4.5M Tweco 4
717335
Tweco 4 connection type, length is 4.5 metres, 400
Amps @ 60%, contact tip OTW14/45 (1.2mm)
TWECO SUPRA XT MIG
TORCH 4.0M Tweco 4
SE4004M16
Tweco connection type, length is 4.0 metres, 450
Amps @ 60%, contact tip OTW15H/116 (1.6mm)
Interconnect Assy,19P-
19P,2M
W4015900
19 pin to 19 pin, 2 metres in length, suitable for
Transmig 350i, 450i & 550i
Interconnect Assy,19P-
19P,8M
W4015901
19 pin to 19 pin, 8 metres in length, suitable for
Transmig 350i, 450i & 550i
Interconnect Assy,19P-
19P,15M
W4015902
19 pin to 19 pin, 15 metres in length,suitable for
Transmig 350i, 450i & 550i
Interconnect Assy,19P-
14P,8M
W4016000
19 pin to 14 pin, 8 metres in length,suitable for
Transmig 400i, MPM8/255H, MPM8/270K
Adaptor Cable,19P-14P,
0.3M
W4016001
19 pin to 14 pin, 0.3 metres in length, required for
MPM12/400K & MPM20/500P
Spool Cover Assembly W4016300
Suitable for spools up to 300mm diameter.
Contains plastic spool cover and all necessary
mounting hardware
TWECO No 4 Adaptor
Assembly
W4016400
Tweco No 4 connection, designed for Supra XT
MIG torch SE4004M16, Tweco No 4 MIG torch
717201 & 717335. Rated at 450A @ 60%
Lifting Eye Kit W4016700 Electrically insulated.
Heavy Duty 4 Wheel
Trolley
W4000001
Heavy duty, large castor wheel trolley for moving
the Wirefeeder around the work area.
Mig Pliers WSPLIER
Specifically designed for MIG welding applications.
Manufactured from drop forged carbon steel.
Spring loaded handle. Excellent for trimming MIG
wire or holding tips and nozzles.
Naka Measurement Gauge 646265
Measures leg length, root gap, plate
thickness,convexity, wire and rod diameter and
height of welds.
Nozzle Dip 702389
Supplied in 450g tin. Helps to prevent the adhesion
of spatter to tips and nozzles.
Table 2-3 Options and Accessories