Tweco VAF4 Transmig - Manual (Page 42)

TRANSMIG VAF4
INSTALLATION, OPERATION AND SETUP 3-24 Manual 0-5231
6. Tighten M10 x 15 Hex Bolt securely with 13mm spanner and secure the welding cable to Tweco No. 4
Torch Adaptor.
Art # A-11633
Figure 3-21 Securing Welding Cable
7. Use the 3mm Allen Key supplied to install the M6 × 6 set screw in the wirefeed plate then install Thumb
Screw.
Set Screw, M6 × 6
Thumb Screw
Art # A-11342_AB
Figure 3-22