Tweco VAF4 Transmig - Manual (Page 57)

TRANSMIG VAF4
Manual 0-5231 3-39 INSTALLATION, OPERATION AND SETUP
!
WARNING
If the Gun Trigger is used to feed wire through the gun, the electrode wire will be at welding voltage
potential whilst it is being fed through the wirefeeder system.
!
WARNING
Before connecting the work clamp to the work piece make sure the mains power supply is switched off.
Art # A-11537
Positive Welding
Terminal (+)
Work Lead
VAF4 Wirefeeder
19 Pin Control Socket
Mig Torch
Figure 3-37 Setup for Wirefeeder with MIG (GMAW) Welding with Gasless MIG Wire