Tweco VAF4 Transmig - Manual (Page 44)

TRANSMIG VAF4
INSTALLATION, OPERATION AND SETUP 3-26 Manual 0-5231
Attaching Tweco No. 4 MIG Torch
1. Connect the 4 pin plug with 4 pin - 8 pin adaptor and then insert the adaptor into the 8 pin control
socket, and rotate threaded collar fully clockwise to lock the plug into position.
2. Fit the Tweco No. 4 MIG torch to the Wirefeeder by pushing the MIG Torch Connector into the Tweco No.
4 Torch Adaptor and secure it by tightening the Thumb Screw supplied.
Art # A-11343_AB
Torch Adaptor,
Tweco No 4
MIG Torch Connector
8-Pin Control Socket
4-Pin Plug
Thumb Screw
4 pin- 8 pin Adaptor
Figure 3-24 Attaching Tweco No 4 MIG Torch