Transmig vaf4 – Tweco VAF4 Transmig User Manual
Page 37
Advertising
TRANSMIG VAF4
Manual 0-5231
3-19
INSTALLATION, OPERATION AND SETUP
Removing Euro MIG Torch Adaptor
1. Remove the top cover from the base.
a. Open side door to access door earth wire.
b. Disconnect the earth wire from the door and then close the door again.
c. Remove the six screws on the top cover and the four screws on the side of the cover, then remove the
cover. Keep the screws for future use.
Art # A-11519
Earth Wire
Figure 3-11 Removing Earth Wire
Screw
Star Washer
Screw
Art # A-11520
(Note: For clarity of picture, some
screws are not shown.)
Screw Hole
/
Figure 3-12 Removing the Cover
Advertising