Tweco VAF4HD Transmig - Manual (Page 36)

TRANSMIG VAF4HD
INSTALLATION, OPERATION AND SETUP 3-18 Manual 0-5269
3.13 Installing Tweco No. 5 Adaptor (Optional)
WARNING
There are dangerous voltage and power levels inside this product. Turn OFF wirefeeder and disconnect
from the power source before installing kit.
The following components are included in this kit:
Description Quantity
Torch Adaptor, Tweco No. 5 1
Outlet Guide 1
Set Screw, M4 ×6 1
Lock Washer, M12 1
Lock Nut, M12 1
Gas Hose, 170mm 1
Hose Clamp, ø 8.7 2
Wire Tie 2
Allen Key, 2mm 1
Table 3-9 Tweco No 5 MIG Torch Adaptor Assembly