Tweco VAF4HD Transmig - Manual (Page 42)

TRANSMIG VAF4HD
INSTALLATION, OPERATION AND SETUP 3-24 Manual 0-5269
Attaching Tweco No. 5 MIG Torch
1. Insert the 4 pin plug into the 4 Pin Trigger Socket, and rotate threaded collar fully clockwise to lock the
plug into position.
2. Fit the Tweco No. 5 MIG torch to the Wirefeeder by pushing the MIG Torch Connector into the Tweco No.
5 Torch Adaptor and secure it by tightening the Thumb Screw.
Tweco No. 5
MIG Torch Connector
4 Pin Plug
4 Pin Trigger Socket
Thumb Screw
Art # A-11788
Tweco No. 5
MIG Torch
Figure 3-21 Attaching Tweco No 5 MIG Torch