Tweco VAF4HD Transmig - Manual (Page 45)

TRANSMIG VAF4HD
Manual 0-5269 3-27 INSTALLATION, OPERATION AND SETUP
4. Install the spool hub component parts over the spool hub shaft in the following sequence.
Friction Washer
Spool Hub
Keyed Washer
Spring
Flat Washer
3-lobe Screw
Retaining Clip
Art # A-11773
Figure 3-25 Spool Hub Assembly
!
WARNING
Fully tighten all fasteners.
Refer to the figures below for the assembled spool cover:
Art # A-11774
Figure 3-26a Assembled Spool Cover (door opened)
Art # A-11775
Figure 3-26b Assembled Spool Cover