SARGENT Profile Series v.G1.5 Exit Devices - Manual (Page 11)

9
800-810-WIRE (9473) • www.sargentlock.com • A7757B
Profile Series v.G1 Exit Device
Copyright © 2006, 2008, Sargent Manufacturing Company
, an A
SSA ABL
O
Y
Group company
. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Rim Installation Instructions (Continued)
-
+
-
+
-
+
-
+
+
-
+
-
Security
screw
Security tool
01-0297 included
Battery keeper
Battery cover
- Polarity
+ Polarity
Bottom slots
Top tab
Tabs
Top slots
Step #6 Rail Assembly
Attach rail assembly according to exit installation instructions A6770
Fig. 4
Fig. 5 Fig. 6 Fig. 7
1. Place (6) “AA” batteries into
the compartment, being
careful to align polarity
properly (Fig. 5).
2. Install battery keeper clip
by inserting tabs into
bottom slots first (Fig. 6). To
remove keeper, pull on top
tab. For RF Technology
version refer to Section 9.
3. Attach battery cover to inside
escutcheon, making sure to
line up tabs with retaining
slots in battery cover. Secure
with security screw (Fig. 7).
Note: For RF
Technology versions
(G1-TU, G1-TP, G1-TA)
refer to Section 9 when
installing/removing
battery keeper.