SARGENT Profile Series v.G1.5 Exit Devices - Manual (Page 3)

1
800-810-WIRE (9473) • www.sargentlock.com • A7757B
Profile Series v.G1 Exit Device
Copyright © 2006, 2008, Sargent Manufacturing Company
, an A
SSA ABL
O
Y
Group company
. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
The SARGENT Profile Series v. G1 Rim/Mortise Exit Device is designed for areas
which require stand alone authorized entry. It is a self-contained microprocessor-
controlled keypad with non-volatile memory. The keypad will hold a total of 100
(LK)/2000 (GI-LU, GI-PK, GI-PA, G1-TU, G1-TP, G1-TA) different user codes. User
locations “01” & “02” are utilized for Master and Supervisory Codes, respectively.
This product is operated by six (6) “AA” alkaline batteries. SARGENT exit devices
locks are designed with high quality components to provide high security,
performance and durability.
General Description 2
Items Supplied with Exit Device
Items included in your 8877 and 8977 Series Exit Device
carton:
• Outside Escutcheon with Keypad
• Outside motorized Trim Assembly
• Exit Device
• Mortise cylinder for 8977
• Rim cylinder for 8877
• Inside Escutcheon with Circuit Board and Battery Pack
• 6 “AA” alkaline batteries
• Screw Pack
Items included in your 8878 and 8978 Series Exit Device
carton:
• Outside Escutcheon with Keypad
• Outside Motorized Trim Assembly
• Exit Device
• Inside Escutcheon with Circuit Board and Battery Pack
• 6 “AA” alkaline batteries
• Screw Pack
Specifications
Profile Series Rim Exit
• Latch – 3/4" throw, stainless steel
• Outside motor driven “ET” lever controlled by keypad
• Push bar retracts latch from inside
• Fire stop provided on all lever handle designs
• Profile Series exit devices furnished for 1-3/4" doors
• UL Listed
• Accepts all SARGENT rim cylinders (8877 only)
• Key retracts latch (8877 only)
• Available in “ET” lever handle designs only
Profile Series Mortise Exit
• Latch – 3/4" throw, anti-friction, brass
• Outside motor driven “ET” lever controlled by keypad
• Push bar retracts latch from inside
• Fire stop provided on all lever handle designs
• Profile Series exit devices furnished for 1-3/4" doors
• UL Listed
• Accepts all SARGENT mortise cylinders (8977 only)
• Key retracts latch (8977 only)
• Available in “ET” lever handle designs only
Features
• Low battery alert – 4 chirps after code entry
• External remote “request to enter” connector
• Master, Emergency or Supervisory code will unlock door
when low battery has expired
• Programming done at keypad or with a PDA using
SofLink™ Plus software and a PC (software required for
G1-PA & G1-TA)
• Entry of three wrong User Codes disables all codes for
ten seconds. Yellow LED on solid
• Last 15 transactions can be output to portable printer
via infrared link (LK Only)
• Last 2000 (Except LK) transactions can be output to
PC using a PDA and SofLink™ Plus software
3
4