Transporting the air drill, Transport safety information, Warning – Great Plains NTA3007 Operator Manual User Manual

Page 54

Advertising
background image

50

NTA907 or NTA3007

Table of Contents

Index

Great Plains Manufacturing, Inc.

166-371M

Table of Contents

Index

2012-07-02

Transporting the Air Drill

Transport Safety Information

Inadequate Tractor Hazard:
Tractor must weight at least 67% of the drill as towed. Ensure
that the towing vehicle is adequate for the task. Using an
inadequate tow vehicle is extremely unsafe, and can result in
loss of control, serious injury and death. See table on next
page. Do not tow if drill exceeds the load rating of the vehicle.
Check Bridge Loads:
A loaded drill can exceed the load ratings of bridges you must
cross.

Excessive Speed Hazard:
Maximum transport speed is 30 km/h or 20 mph at all times.
Excess speed can result in loss of control or inability to stop.
Reduce speeds with materials loaded, or if road conditions are
less than ideal.

Unexpected Wing Tilt-Down or Unfold Hazard:
Use transport locks (wing and centre section “ROAD” locks,
and hook cylinder lock channel). Failure to use these safety
features can cause a major accident resulting in death, injury
and equipment damage. If locks are not engaged, and a
hydraulic failure occurs, or a circuit is unintentionally set to
Float, wings can tilt down or unfold.

Loss of Control Hazard, Tires:
Inflate tires to factory specifications. Tighten wheel nuts to
specifications. Under-inflated tires or loose nuts can cause
loss of control. Over-inflated tires or over-tightened nuts can
fail suddenly and cause loss of control. Loss of control can
cause a major accident resulting in death, injury and
equipment damage.

Collision Hazard:
Check lights and reflector regularly. Replace bulbs and
faded/worn/missing decals as required. Use lights in transport.
These features are critical to visibility, particularly with other
drivers unfamiliar with farm equipment or not expecting to
encounter a slow-moving vehicle.

Note: An installation of optional brakes on the drill does

not reduce tractor capability requirements or
increase maximum transport speed.

818 188C R v C

Do Not exceed 20 mph maximum transport
speed. Loss of vehicle control and/or machine
can result.

To Prevent Serious Injury or Death:

EXCESSIVE SPEED HAZARD

WARNING

Advertising
This manual is related to the following products: