Tractor requirements, Transport checklist, Typical nta907 or nta3007 weights – Great Plains NTA3007 Operator Manual User Manual
Page 55: Warning
Great Plains Manufacturing, Inc.
Operating Instructions
51
2012-07-02
166-371M
Tractor Requirements
The figures in the table below represent a limited number
of configurations. The weight of your drill can vary by
thousands of pounds, even if it is the same base model,
due to installed options and/or after-market equipment.
If your tractor weight or capability is near its limits, take
your empty drill to a scale and get a precise weight.
Transport Checklist
❑ Plan the route. Avoid steep hills. Keep Clearances in
mind. Folded, your NTA907 or NTA3007 is just under
4.1 m (13.5 feet) high and just under 3 m (10 feet)
wide.
❑ Hitch.
Make hydraulic, electrical and optional braking
connections. See “Hitching Tractor to Drill” on
page 27.
❑ Close hopper lids (page 55).
❑ Check that ladder (page 54), auger (page 64) and
markers (page 73) are stowed.
❑ If unfolded, raise, tilt, fold and hook drill.
See “Folding the Drill” on page 44.
❑ Remove wheel chocks.
❑ Always have lights on for highway operation.
Verify that Model NTA907 rear beacon switch is on
(page 31).
❑ Comply with all national, regional and local safety
laws when travelling on public roads.
❑ Release all brakes and travel with caution.
Typical NTA907 or NTA3007 Weights
29400
Material may be loaded prior to travel, but increases stopping
distance, increases the need for caution in turns and braking,
and increases tire and brake wear.
818 188C Rev C
Do Not exceed 20 mph maximum transport
speed. Loss of vehicle control and/or machine
can result.
To Prevent Serious Injury or Death:
EXCESSIVE SPEED HAZARD
WARNING
NTA907
NTA3007
NTA907
NTA3007
NTA907
NTA3007
-3610 (36 rows)
-4875 (48 rows)
-6006 (60 rows)
Base Drill Weight
9 900 kg
21,900 lb
10 800 kg
23,900 lb
11 700 kg
25,900 lb
600 kg
1,300 lb
800 kg
1,800 lb
1 000 kg
2,200 lb
Add for Auger
290 kg
650 lb
290 kg
650 lb
290 kg
650 lb
Add for Markers
700 kg
1,400 lb
700 kg
1,400 lb
700 kg
1,400 lb
Add for Brakes
100 kg
220 lb
100 kg
220 lb
100 kg
220 lb
Maximum Empty Drill
11 600 kg
25,600 lb
12 700 kg
28,000 lb
13 800 kg
30,400 lb
Add for Maximum Load
8 500 kg
18,700 lb
8 500 kg
18,700 lb
8 500 kg
18,700 lb
Maximum Loaded Drill
20 100 kg
44,300 lb
21 200 kg
46,700 lb
22 300 kg
49,100 lb
Add for Coulters