Great Plains 3PYP Predelivery Manual - Manual (Page 10)

6 3PYP
401-312Q 07/19/2011
Using This Manual
This manual will familiarize you with planning, unloading,
assembly, and some calibration of the planter. Most oper-
ating information is contained in the Operator manual
(401-312M). It is essential that the Operator manual be
available during assembly and checkout.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
What’s On The Truck
Refer to Figure 3
The 3PYP Planter is delivered from the factory on a flat-
bed semi-trailer. It needs to be unloaded from the truck
at the spot where final assembly takes place.
It is expected that final delivery to the customer will be
done using the planter’s own transport wheels, after final
assembly.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
FigureSpacer:
Figure 2
Right / Left
25050
R
L
U
D
F
B
L
R
FigureSpacer:
Figure 3
Planter on Truck
25344