Shipment inventory – Great Plains 3PYP Predelivery Manual User Manual
Page 11
Advertising
Introduction 7
07/19/2011
401-312Q
Shipment Inventory
The planter is shipped as the following 5 subassemblies
or kits:
Refer to Figure 4
1.
Main frame consisting of:
the complete tool bar with all the row units,
press wheels (two center units strapped on top),
air delivery system,
markers (if ordered),
parallel arms, and
gauge wheels (except on planters with 15in or 20in
row spacing).
FigureSpacer:
Rear Seed support structure consisting of
the frame, with
hydraulic steering components,
air distribution box,
caster mounts,
walkboard, and;
82 bu hopper (if ordered).
Note: The hopper is mounted on the frame at 90 degrees
from it’s operating orientation.
FigureSpacer:
Figure 4
Main Frame
29142
FigureSpacer:
Figure 5
Rear Support Structure
25346
Advertising