Great Plains 3PYP Predelivery Manual - Manual (Page 29)

Planter Assembly 25
07/19/2011 401-312Q
Install Caster Wheels
Refer to Figure 44 (tie rods not installed)
61. Remove and save the lug nuts (not shown)
803-219C NUT LUG 5/8-18 X 90 DEG PLT
from the right caster hub.
Note: If you do not have two or more people to assist in
wheel mounting, temporarily install the tie rods to
restrain the caster arms.
62. Roll one of the wheel assemblies (they are identical)
up to the caster arm. Orient the side with the valve
stem away from the hub (toward seed structure cen-
ter).
63. Adjust the elevation of the seed structure so that the
wheel just fits over the threaded studs on the hub.
This eases the assembly.
64. Seat the wheel on the hub and secure with saved
lug nuts .
FigureSpacer:
FigureSpacer:
Figure 44
Install Caster Wheels
29158
38
38