Bio-Rad Gene Pulser MXcell™ Electroporation System - Manual (Page 33)

Gene Pulser MXcell™ System Manual | Program and Run the System
24
5. (Optional) Select another quadrant.
Press and release the up and down arrow keys to move through parameters within a
quadrant. Press and hold the up and down arrow keys to select another quadrant.
6. Press the PULSE button to electroporate the sample.
TIP: Once you start a protocol, you can stop the experiment if needed. To stop a
protocol, press and hold the
PULSE button. When the protocol stops, the screen
displays the last pulse (“Last Pulse Option” on page 26).
User Protocols Option
Choose an existing protocol to run, or create, open, rename, or delete a protocol from the
User Protocol list. Save any protocol as a user protocol for future experiments. Run the
protocol, or edit it and then run it.
To select and run a user protocol, follow these instructions:
1. Select User Protocols in the home screen.
Press ENTER to confirm the selection:
NOTE: This opens the directory for the current user. To select a different user
directory, select User Directory instead. Press ENTER to confirm selection.
2. Select for a protocol from the list in the user protocol.
Press the up and down arrow keys to select a protocol. Then Press ENTER to confirm
selection.
3. (Optional) To view another protocol from another user’s directory, press the Back
key.
Press and release the up and down arrow keys to move from one protocol to the next.
Press and hold the up and down arrow keys to scroll from screen to screen.
User Directory
User Protocols
Protocols for user:
Mike16
1.
- (E.coli)
2. - (empty protocol)
3. - (empty protocol)
4. - (empty protocol)
5. - (empty protocol)
(more?)
Registered Users:
1.
-(no user registered)
2. -(no user registered)
3. - (no user registered)
4. - (no user registered)
5. - (no user registered)
(more…
?
)