Bio-Rad Gene Pulser MXcell™ Electroporation System - Manual (Page 6)

v
Warranty
The Gene Pulser MXcell electroporation system is warranted against defects in materials and
workmanship for 1 year from date of purchase. If any defects occur in the instruments or accessories
during this warranty period, Bio-Rad Laboratories will repair or replace the defective parts at its discretion
without charge. This warranty does not apply to the fuses and the following items are specifically
excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an authorized agent.
3. Damage caused by substituting alternative parts.
4. Use of fittings or spare parts supplied by anyone other than Bio-Rad Laboratories.
5. Damage caused by accident or misuse.
6. Damage caused by disaster.
7. Corrosion caused by improper solvent or sample.
For any inquiry or request for repair service, contact Bio-Rad Laboratories and tell us the model and serial
number of your instrument.
IMPORTANT: This Bio-Rad instrument is designed and certified to meet EN61010* and the EMC
requirements of EN61326 (for Class A) safety standards. Certified products are safe to use when operated
in accordance with the instruction manual. This instrument should not be modified or altered in any way.
Alteration of this instrument will cause the following results:
• Void the manufacturer's warranty
• Void the EN61010 safety certification
• Create a potential safety hazard
Bio-Rad Laboratories is not responsible for any injury or damage caused by the use of this instrument for
purposes other than those for which it is intended, or by modifications of the instrument not performed by
Bio-Rad Laboratories or an authorized agent.
*EN61010 is an internationally accepted electrical safety standard for laboratory instruments.