Bio-Rad Gene Pulser MXcell™ Electroporation System - Manual (Page 64)

Gene Pulser MXcell™ System Manual
55
Appendix D: Product Specifications
and Information
The following tables provide product specifications and information about the Gene Pulser
MXcell™ electroporation system, including operating specifications and catalog numbers.
Product Specifications
Table 18 lists specifications for the entire system, including the power module and plate
chamber:
Table 19 lists the general specifications for the entire system:
Table 18. System specifications for Gene Pulser MXcell electroporation system
Waveform Exponential decay or Square wave
Voltage 10–500 V in 2 V increments
Capacitance 25–2475 μF in 25 μF increments
Resistance
(Parallel) 50–1,500
Ω in 50 Ω increments plus infinity
Sample
Resistance 10
Ω minimum at 10–500 V; 125 Ω with Gene Pulser electroporation buffer
Square Wave
Timing 10–500 V: 0.05–9999.95 ms pulse length, 1–3 pulses
0.1–10 sec pulse interval
Table 19. General specifications for Gene Pulser MXcell electroporation system
Type Specification
Input Voltage 100–120 VAC or 220–240 VAC, 50/60 Hz
Power Max 240 W (During short charging periods)
Operating environment Temperature 0–35 o C, Humidity 0–95%, (non-condensing)
Regulatory Safety EN 61010, EMC EN61326 Class A
Dimensions Power Module 31 x 30 x 14 cm, weight 6.62 kg