Bio-Rad PowerPac™ HV High-Voltage Power Supply - Manual (Page 13)

Section 3
Product Setup
3.1 Power Supply Connections
This section describes how the PowerPac HV power supply is connected to an electrophoresis
cell or cells.
Step Procedure Description
1. Connect the Connect one end of the included power cord to the
power cord rear of the instrument. Connect the other end to a
compatible power source.
2. Connect cells Insert power leads into one of the output terminals
located on the front of the power supply (shown to
the left). Note that the
symbol indicates high
voltages and that the
power leads must be inserted perpendicular to the
curve of the case (see below).
Fig. 5. Power Lead Connected Correctly
Fig. 6. Power Leads Connected Incorrectly
5
PowerPac HV – Instruction Manual