Bio-Rad PowerPac™ HV High-Voltage Power Supply User Manual
Page 17
KEY CHIRP
ON
Activates the audible signal for keystroke.
(Default)
OFF
DATE
MM/DD/YY
This is the only format available.
Press the change soft key then enter the
correct date using the alphanumeric
keypad.
TIME
HH:mm
24 hr format. Factory setting is Pacific
Standard time
Press the change soft key then enter the
correct time using the alphanumeric
keypad.
TEMP PROBE CK
ON
This preference is only available when
Temperature Probe Check
(Default)
the temperature probe is connected.
OFF
ON: The run is paused and error code
18 is displayed in case of failure. A failure
occurs when the temperature remains
5°C less than the set temperature for
more than 15 minutes. This can be caused
by a detached temperature probe or an
insufficient power setting.
OFF: Run will continue regardless the
temperature.
9
SETUP
KEY CHIRP
ON
DATE
12/07/04
* TIME
16:38 HRS
CHANGE
EXIT
RESET
IRDA ON
CONTRAST HI
* KEY CHIRP ON
CHANGE EXIT RESET
SETUP
KEY CHIRP
ON
DATE
12/07/04
* TIME
16:38 HRS
CHANGE
EXIT
RESET
PowerPac HV – Instruction Manual