Bio-Rad PowerPac™ HV High-Voltage Power Supply - Manual (Page 33)

4.5 Edit a Paused Run
The PowerPac HV permits editing the run parameters during a pause in all operation
methods modes: Manual, Basic, IEF Methods, and Temperature Mode. The edit capability
during Pause is limited to the current and subsequent steps, and follows the same edit
sequence used when programming the original run. If the current step started as untimed it
cannot be changed to hours or volt-hours.
Fig. 11. Menu Overview for Editing a Paused Method.
RUN: S2/4
216 V
235 mA
50 W
00:02/00:30 :32HRS____
PAUSE
RUN PAUSED AT:
02/18/03 16:11:09
216V 235mA 50W
Time: 00:01 Vh: 00011___
EDIT CONTINUE
RUN TERMINATED AT:
02/18/03
16:11:09
216V 235mA 50W
TIME: 1:00 Vh: 00175
RERUN EXIT
EDIT Loop -
See specific
method section
RUN COMPLETED AT:
02/18/03
16:11:09
216V 235mA 50W
TIME: 1:00 Vh: 00175
RERUN EXIT
25
PowerPac HV – Instruction Manual