Bio-Rad PowerPac™ HV High-Voltage Power Supply - Manual (Page 21)

Step Procedure Description
6. Start the run Press to start a run. A run may be started from
any
screen of the EDIT loop as long as a valid
constant parameter value has been entered.
7. Monitor the run The run screen displays the elapsed time versus the
programmed time (timed runs), elapsed time
(untimed run), voltage, current and power values.
8. Pause Press the soft key PAUSE or the key to pause
the run in progress.
The run parameters and user preferences may be
edited during pause.
Press EDIT to change run parameters
Press SETUP to change user preferences.
Press the soft key CONTINUE or the key to
resume the run.
13
PowerPac HV – Instruction Manual