Bio-Rad PowerPac™ HV High-Voltage Power Supply - Manual (Page 14)

Step Procedure Description
3. Turn power on Use the switch located on the right side of the power
supply to power on. Initially, the unit will display the
firmware version and serial number for a few seconds,
then go to the Home screen. The Home screen soft
keys are used to select operation modes; Manual
(Section 4.1), IEF Methods (Section 4.3), and Basic
Methods (Section 4.2).
To access the Temperature mode insert the leads
of the thermocouple probe into the connections at
the rear of the power supply (Section 4.4).
3.2 Preferences Setup
The PowerPac HV offers customizing options to enable and disable safety features and
infrared (IR) port, as well as LCD display contrast adjustment, key sound, and set local time
and date.
Step Procedure Description
1. Open the Setup editor Press SETUP to start the Setup editor. SETUP can
be pressed from any screen except the run screen.
2. Select the SETUP Scroll through the SETUP preferences using the
preference arrow keys. The asterisk indicates the selected
preference.
The soft key CHANGE toggles between the different
options or settings for the selected preference.
The RESET soft key allows the user to change all
the preference settings to the default values, except
for time and date.
3. EXIT Pressing the EXIT soft key or the SETUP key
accepts any changes made, and exits the SETUP
menu.
6
PowerPac HV – Instruction Manual