Bio-Rad ProteinChip Data Manager Software User Manual
Page 16
Advertising
Setting Up the ProteinChip SELDI System
Page 11
Fig. 8: The New Instrument dialog box.
3.
Enter a name for the reader into the Name field. This can be any name of
your choosing. This is a required field.
4.
Enter the reader’s Serial Number. This is a required field. See Fig. 8, below,
for the location of the serial number.
Fig. 9: The serial number plate.
5.
Enter the IP address of the instrument in the Host Name/IP field. The IP
address is preconfigured to be “192.168.1.200”. This is a required field.
6.
Click the Create button to complete the instrument profile.
Advertising