Bio-Rad ProteinChip Data Manager Software - Manual (Page 45)

Page 40 Networking the ProteinChip SELDI System
ProteinChip SELDI System: Reader Guide
Fig. 37: The Network Settings web page.
5. Enter the network settings for the reader obtained from your IT group, then
press the Save Changes button. The changes may take a few minutes to
take effect.
IMPORTANT
Clicking the Save Changes button will change your reader's settings
immediately. Thereafter, the client workstation will be unable to
communicate with the reader until the workstation’s settings are also
changed.
6. Plug the network cable from the reader into a network outlet (do not use
the red cross-over cable, as it will not work).