Shutting down the proteinchip seldi reader, Basic maintenance – Bio-Rad ProteinChip Data Manager Software User Manual
Page 23
Page 18
ProteinChip SELDI System: Reader Guide
Fig. 15: Collecting data in Auto Mode (Enterprise Edition).
Shutting
Down the
ProteinChip
SELDI Reader
To shut down the reader and turn off the power, first stop data collection, if
necessary, by clicking on the Stop Run (
) button on the toolbar, then select
Instrument Shutdown from the Instrument menu. Wait for the System Active
light on the lower right side of the reader to go out. It is then safe to shut off
power to the reader.
Basic
Maintenance
Load Lock Door Cleaning for Enterprise Edition
Instruments
NOTE
Training on the following maintenance procedures will be provided during
basic training course. For technical service, call your local Bio-Rad office, or in
the US, call 1-800-4-BIORAD (1-800-424-6723).
1.
Shut down the reader by choosing Instrument Shutdown from the
Instrument menu.