Bio-Rad ProteinChip Data Manager Software - Manual (Page 17)

Page 12
ProteinChip SELDI System: Reader Guide
Connect to the reader using ProteinChip data manager client
software
1. After the reader profile has been created, connect to the reader by
highlighting the reader name in the Explorer pane.
2. Once the connection is made, the Home tab will be displayed. You may
receive a “Server mismatch” error message on connecting. You must now
configure the reader to communicate with the ProteinChip data manager
server software.
Set up communication between the reader and ProteinChip data
manager server software
In order for the reader to save data to the server, you must specify the name of
the computer running the ProteinChip data manager server software.
1. On the ProteinChip data manager client computer, open the Control Panel,
then click System. In the System Properties dialog box, click the Computer
Name tab.
2. To determine the computer name, locate the field called Full computer
name and copy down the text up to the first decimal point (Fig. 10). Once
recorded, you can click Cancel to close the dialog box.
Fig. 10: The System Properties dialog box.
Server computer name