Bio-Rad ProteinChip Data Manager Software - Manual (Page 35)

Page 30 Networking the ProteinChip SELDI System
ProteinChip SELDI System: Reader Guide
Fig. 26: The Network Settings web page.
5. Click the Obtain network settings automatically (DHCP) option then
click the Save Changes button. The changes may take a few minutes to
take effect.
IMPORTANT
Clicking the Save Changes button will change your reader’s settings
immediately. Thereafter, the client workstation will be unable to
communicate with the reader until the workstation’s settings are also
changed.
6. Unplug the cross-over cable, and plug the network cable from the reader
into network outlet, using a standard network cable (do not use the red
cross-over cable, as it will not work).