Dako Pascal - Manual (Page 16)

Pascal Handbook 16
3. Press the Display Set button again until the SP2 LED illuminates. Use the up and down
arrows to set the SP2 temperature to the desired cool down temperature.
4. Press the Display Set button again and use the up and down arrows to set the SP2
time to the desired program time.
Note When Pascal has reached the SP1 temperature and time, the heating element will
turn off automatically and cannot be turned on again until after reaching an internal
temperature of 37 ºC. Also, the SP2 temperature will not be maintained when reached; the
alarm is only an indicator that the SP2 temperature has been reached.
5. Press the Display Set button until the SP Limit LED indicator illuminates. Use the up
and down arrows to set the SP Limit to the desired circuit breaker temperature setting.