Dako Pascal - Manual (Page 17)

Pascal Handbook 17
Section 5
Maintenance
Daily
The following maintenance procedures should be performed after each daily use of
Pascal:
Pour water out of pan.
Rinse pan with deionized water and dry.
Inspect gasket for wear.
Lid can be left on top of pan, but should be left slightly ajar.
Monthly
Preventative Maintenance should be performed once per month:
Pan, Gasket, Vent Nozzle and Weight
Remove the pan, gasket, lid, and weight and soak each in warm water with a mild
dish detergent. Abrasive powders or metal scrubbers will damage the surface and
may cause contamination. Wash thoroughly with a sponge and then dry well. To
protect against electrical hazards, do not immerse cord/plug or the body of Pascal
in water or a dishwasher.
Inspect gasket for wear. Do not pull or tear the gasket.
Inspect lid and pan for corrosion - especially where these parts come into contact with the
gasket.
If the vent nozzle becomes blocked with debris, clear the path with a toothpick or similar
device and wash clean.
Heat Plate and Heat Sensor
Wipe off anything stuck to the heat plate or heat sensor. Dry with a soft cloth.
Body
Wipe the surface lightly with a soft cloth soaked in warm water.
Be careful that water does not get into the body.