Dako Pascal - Manual (Page 24)

24
Pascal Quality Control Log
mm/dd/yy - mm/dd/yy
Log Dates ___________ - ___________
Operated By:
Run No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Technician Initials
Run Date
Operation Parameters*
Volume Water in Pan (mL)
Room Temperature Calibration Checked
(°C)
SP1 Temperature Set Point (°C)
SP1 Time Set Point (minutes/seconds)
Operation Results
SP1 Temperature (°C)
SP1 Pressure (psi)
Pascal Quality Strips**
Pascal Quality Strip (attach)***
Reviewed and Approved by :
________________________________________________ Date: __________________
Notes
*Operation Parameters are user defined programmed times and temperatures based on user’s protocol(s).
**Enter ‘D’ for DARK, ‘M’ for MEDIUM, and ‘L’ for LIGHT. Shade of strip is determined by visual inspection and relative to previous runs/technician experience.
***Adhere the run specific Quality Strip under the appropriate run log details.