Dell Latitude XT (Late 2007) - Manual (Page 123)

Troubleshooting 123
Starting the Dell Diagnostics From the Drivers and Utilities Media
1 Insert the Drivers and Utilities media.
2 Shut down and restart the Tablet-PC.
When the DELL logo appears, press <F12> immediately.
NOTE: If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft ® Windows ® desktop; then, shut down your
Tablet-PC and try again.
NOTE: The next steps change the boot sequence for one time only. On the
next start-up, the Tablet-PC boots according to the devices specified in the
system setup program.
3 When the boot device list appears, highlight CD/DVD/CD-RW and press
<Enter>.
4 Select the Boot from CD-ROM option from the menu that appears and
press <Enter>.
5 Type 1 to start the CD menu and press <Enter> to proceed.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If
multiple versions are listed, select the version appropriate for your
Tablet - PC.
7 When the Dell Diagnostics Main Menu appears, select the test you want
to run.
Dell Diagnostics Main Menu
1 After the Dell Diagnostics loads and the Main Menu appears, click the
button for the option you want.
NOTE: It is recommended that you select Test System to run a complete test on
your Tablet-PC.
Option Function
Test Memory Run the stand-alone memory test
Test System Run System Diagnostics
Exit Exit the Diagnostics
book.book Page 123 Tuesday, May 13, 2008 5:03 PM