Dell Latitude XT (Late 2007) User Manual
Page 183
Advertising
Adding and Replacing Parts
183
3 Connect the display cable to the system. When doing so, make sure that:
• The pull-tab is lying flat in the recessed area. If the bale wire is not
flush to the palm rest, the keyboard will not sit flat on the palm rest.
• The LCD cable wires are flush to or below the palm rest surface so
that the keyboard can sit flat on the palm rest.
1
shrink tube
2
tape
3
tape recess
4
palm rest
1
2
3
4
book.book Page 183 Tuesday, May 13, 2008 5:03 PM
Advertising