Removing a mini-card – Dell Latitude XT (Late 2007) User Manual
Page 171

Adding and Replacing Parts
171
NOTICE:
To prevent damage to the system board, remove the main battery before
you service the Tablet-PC.
Removing a Mini-Card
1 Follow the procedures in "Before You Begin" on page 155.
2 Remove the memory and Mini-Card cover. See "Removing the Memory
and Mini-Card Cover" on page 168.
3 Ground yourself by touching one of the metal connectors on the back of
the Tablet-PC.
NOTE:
If you leave the area, ground yourself again when you return to the
Tablet-PC.
4 Disconnect the cables from the card.
NOTE:
The solid black and white cables belong to the WLAN Mini-Card if you have
installed one, while the white-striped gray, white-striped black, and the solid gray
cables belong to the WWAN Mini-Card you may have installed.
NOTE:
Depending on the type of Mini-Card you have, not all cables may be in use.
1
WWAN slot
2
WLAN slot
1
2
book.book Page 171 Tuesday, May 13, 2008 5:03 PM