Dell Latitude XT (Late 2007) - Manual (Page 205)

Media Base (Optional) 205
T A B L E T -PC RE LE A SE L E VE R — Lets you undock the Tablet-PC from the media base
(see "Undocking Your Tablet-PC From the Media Base" on page 212).
AC A D A P T E R CO N NE C T O R
1 Tablet-PC release lever 2 AC adapter connector
3 audio connector 4 IEEE 1394
5 VGA video connector 6 digital video interface (DVI) connector
7 serial connector 8 USB connector
9 powered USB connector 10 network connector
Connects an AC adapter to the media base and to AC power
to convert AC power to the DC power required by the media
base. You can connect the AC adapter with your media base
either turned on or off. For more information, see "Setting
Up Your Media Base" on page 209.
CAUTION: If you are using a multiple-outlet power
strip, use caution when you plug the AC adapter power
cable into the power strip. Some power strips may
allow you to insert the connector incorrectly. Incorrect
insertion of the power connector could result in
permanent damage to your media base as well as
electric shock and/or fire. Ensure that you insert the
ground prong of the power plug into the mating ground
contact of the power strip.
NOTICE: When you disconnect the AC adapter from the
media base, hold the adapter cable connector, not the
cable itself, and pull firmly to avoid damaging the cable.
book.book Page 205 Tuesday, May 13, 2008 5:03 PM