Setting up your media base – Dell Latitude XT (Late 2007) User Manual

Page 209

Advertising
background image

Media Base (Optional)

209

D O C K I N G

C O N N E CT O R

Allows you to dock your Tablet-PC to the media base (see

"Docking Your Tablet-PC to the Media Base" on page 211 and "Undocking Your

Tablet-PC From the Media Base" on page 212).

Setting Up Your Media Base

CAUTION:

The AC adapter works with electrical outlets worldwide. However,

power connectors and power strips vary among countries. Using an incompatible
cable or improperly connecting the cable to the power strip or electrical outlet
may cause fire or equipment damage.

NOTICE:

Always use the Dell AC adapter that came with the media base. If you use

any other commercially available AC adapter—or the AC adapter from earlier

models of Dell computers—you may damage the media base or the Tablet-PC.

NOTICE:

When you disconnect the Dell AC adapter cable from the Tablet-PC or

media base, grasp the connector, not the cable itself, and pull firmly but gently to

avoid damaging the cable. When you wrap the AC adapter cable, ensure that you

follow the angle of the connector on the AC adapter to avoid damaging the cable.

1 Connect the AC adapter to the AC adapter connector on the media base

and to an electrical outlet.

2 Before you dock your Tablet-PC to the media base for the first time, the

Tablet-PC operating system must have completed its setup process. Do

the following:

book.book Page 209 Tuesday, May 13, 2008 5:03 PM

Advertising