Dell Latitude XT (Late 2007) - Manual (Page 79)

Setting Up and Using Your Tablet-PC 79
NOTE: Some ExpressCards may not operate correctly after the Tablet-PC exits
hibernate mode. Remove and reinsert the card (see "Removing an ExpressCard" on
page 91), or simply restart (reboot) your Tablet-PC.
To Exit Hibernate Mode
To exit hibernate mode, press the power button. The Tablet-PC may take a
short time to exit hibernate mode. You cannot make the Tablet-PC exit
hibernate mode by pressing a key or touching the touch pad or track stick. For
more information on hibernate mode, see the documentation that came with
your operating system.
Configuring Power Management Settings
You can use the QuickSet Power Management Wizard or Windows Power
Options Properties to configure the power management settings on your
Tablet-PC. For more information about QuickSet, right-click the QuickSet
icon in the Windows Notification area and click Help.
Accessing Power Options Properties
• Click the Windows Power icon in the Notification area to display the
Power icon pop-up window.
• Select one of the following from the Select a Power Plan section:
• Dell Recommended
• Power Saver
• High Performance
• Any custom power plan you have created
• To access additional power options, click More Power Options at the
bottom of the pop-up.
Charging the Main Battery
When you connect the Tablet-PC to an electrical outlet or install a battery
while the Tablet-PC is connected to an electrical outlet, the Tablet-PC checks
the battery charge and temperature. If necessary, the AC adapter then charges
the battery and maintains the battery charge.
book.book Page 79 Tuesday, May 13, 2008 5:03 PM