Dell PowerEdge T300 User Manual
Page 100
Advertising
100
Installing System Components
2 Remove the system cover (see "Removing the System Cover" on page 66).
3 Disconnect the cable between the RAID battery and the SAS controller
card, then remove the battery cable from the battery cable slot in the
chassis.
4 Press outward on the battery carrier release tab, then slide the battery
carrier up and out of the system.
5 Press outward on the battery carrier retention tabs and remove the RAID
battery from the battery carrier.
book.book Page 100 Sunday, June 21, 2009 10:04 AM
Advertising