Dell PowerEdge T300 - Manual (Page 113)

Installing System Components
113
CAUTION:
Memory Module DIMMs are hot to the touch for some time after the
system has been powered down. Allow the DIMMs to cool before handling them.
Handle the DIMMs by the card edges, and avoid touching the DIMM components.
4 Press down and out on the ejectors on each end of the socket until the
memory module pops out of the socket.
Figure 3-26. Installing and Removing a Memory Module
NOTICE:
Never operate your system with the processor airflow shroud removed.
Overheating of the system can develop quickly resulting in shutdown of the system
and loss of data.
5 Replace the processor airflow shroud (see "Installing the Processor Airflow
Shroud" on page 72).
6 Replace the system cover (see "Installing the System Cover" on page 67).
Installing Memory Modules
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
1 memory module 2 memory module socket ejectors (2)
3 memory module socket 4 alignment key
4
2
1
3
book.book Page 113 Sunday, June 21, 2009 10:04 AM