Removing memory modules – Dell PowerEdge T300 User Manual
Page 112
112
Installing System Components
•
Install memory modules in bank 1 (DIMM1_
x) before installing memory
modules in bank 2 (DIMM2_
x), and install memory modules in bank 2
before installing memory modules in bank 3 (DIMM3_
x).
•
Configurations of three or five memory modules are not supported.
Removing Memory Modules
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and from the peripherals.
2 Remove the system cover (see "Removing the System Cover" on page 66).
3 Remove the processor airflow shroud (see "Removing the Processor Airflow
Table 3-1.
Sample Memory Module Configurations
Total
Memory
DIMM1_A DIMM1_B DIMM2_A DIMM2_B DIMM3_A DIMM3_B
512 MB
512 MB
1 GB
512 MB
512 MB
1 GB
1 GB
2 GB
512 MB
512 MB
512 MB
512 MB
2 GB
1 GB
1 GB
3 GB
512 MB
512 MB
512 MB
512 MB
512 MB
512 MB
4 GB
1 GB
1 GB
1 GB
1 GB
4 GB
2 GB
2 GB
6 GB
1 GB
1 GB
1 GB
1 GB
1 GB
1 GB
8 GB
2 GB
2 GB
2 GB
2 GB
12 GB
2 GB
2 GB
2 GB
2 GB
2 GB
2 GB
24 GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
book.book Page 112 Sunday, June 21, 2009 10:04 AM