Dell PowerEdge T300 User Manual
Page 117
Advertising
Installing System Components
117
8 Position your thumb firmly over the socket release lever and release the
lever from the locked position. Rotate the lever up, then open the
processor cover.
Figure 3-28.
Installing and Removing a Processor
NOTICE:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
9 Gently, lift the processor out of the socket. Leave the release lever up so
that the socket is ready for processor to be replaced.
1
notch in processor (2)
2
processor
3
ZIF socket
4
socket key (2)
5
socket release lever
1
2
3
4
5
book.book Page 117 Sunday, June 21, 2009 10:04 AM
Advertising