Installing the system fan – Dell PowerEdge T300 User Manual
Page 110
Advertising
110
Installing System Components
Figure 3-25.
Removing and Installing the System Fan
Installing the System Fan
1 Hold the replacement fan with the fan cable on the left side (opposite the
power supply), and align the edges of the fan with the securing slots.
2 Slide the fan into the securing slots until the fan release tab locks into
place (see Figure 3-25).
3 Connect the cable to the FAN2 connector on the system board (see
1
system fan
2
fan release tab
3
securing slots
3
1
2
book.book Page 110 Sunday, June 21, 2009 10:04 AM
Advertising