Installing the power supply distribution module, D. see figure 3-31, D out of the chassis (see figure 3-31) – Dell PowerEdge T300 User Manual
Page 124
Advertising
124
Installing System Components
Figure 3-31.
Removing and Installing the Power Supply Distribution Module
Installing the Power Supply Distribution Module
1 Position the power supply distribution module so that the securing tabs are
fully inserted into the securing slots on the chassis wall (see Figure 3-31).
2 Slide the power supply distribution module down until the blue release pin
locks into place, securing the board.
3 Connect all power cables to the connectors on the system board.
1
power cables
2
power supply distribution module
3
release tab
1
2
3
book.book Page 124 Sunday, June 21, 2009 10:04 AM
Advertising